Home > Exhibition > Content
Maintenance and repair
Jul 22, 2016

Maintenance and repair of the mill is a recurring job, repair work will have a direct impact on mill run rate and service life, then use the process on how to properly maintain and repair, are introduced below:

1, all lubricating oil in mill put in continuous operation for one month should be released, thoroughly cleaned, replace with new oil. After oil change about every 6 months in the combination again.

2, lubrication points lubrication and oil level at least once every 4 hours.

3, mill operation, main bearing oil temperature rise does not exceed 55 degrees centigrade.

4, normal mill operation, transmission bearing and gearbox temperature rise does not exceed 55 degrees Celsius, up to 60 ℃.

Previous: Problem

Next: Maintenance standards