Home > Exhibition > Content
Installation issues
Jul 22, 2016

Ball should be installed on a solid concrete foundation. Foundation design and construction of the mill please refer to the Assembly diagram and map of ball mill. In order to ensure the mill during the part where accuracy is not a major change, ball mill should be based on the use of block structure.

After the concrete compressive strength of more than 75% can be mounted above the mill. Before installing should test the quality based, requires no defects that affect the strength of the concrete, reserved the number of holes and position you want, reserve an hole in the debris and excess water, oil. "Ground wire" method when the installation, surface should be embedded in the base of "Center". Before installing all draw the center lines and on the basis of "Center Board" made eye-catching red dot notation, as benchmarks in the middle of the installation.

Previous: Correct procedure

Next: Problem